Amazing SeaSucker Bike Rack Installs & Removes in Seconds!
Discover the new and amazing Bike Racks from SeaSucker. They are easily installed and removed in seconds from your vehicle, making it the perfect choice for those who do not wish to have a bike rack permanently mounted to their vehicle because of styling issues.
It features (3) powerful (210lb pull-strength rated each) vacuum cups that hold it securely on your vehicle’s roof, trunk or back glass. It’s small and light enough to fit into a bike bag or carry-on luggage for you adventurous types who travel with your bikes. It’s probably the easiest rack in the world to install, and removes in just seconds, all without marking or damaging your car. Best of all it fits on virtually any vehicle.
When you purchase the optional HUSKE fork mounting plugs for your specific type of bike, you will be guaranteed that your bike will fit perfectly and most importantly securely onto the bike rack itself.
We truly invite you to check out the best bike rack on the market in terms of product features and high qualities. We guarantee that you will not be disappointed.
SeaSucker Bike Rack FAQ’S
How fast can you go with a SeaSucker rack on the roof?
We’ve speed tested our racks over 175 mph, in controlled conditions and with adequate safety measures. Nevertheless, going above the speed limit violates the SeaSucker warranty. You must obey all posted speed limits and traffic conditions; if there is no posted speed limit, we recommend not driving above 85 miles per hour. You must adapt your driving style and speed to road conditions, weather conditions, and the load on your SeaSucker rack.
How heavy of a bike can I use with the rack?
45 pounds. For bikes heavier than that (like e-bikes), we recommend you upgrade to the Mini Bomber type of rack.
What types of bikes can I use with this rack?
If you can remove your front wheel and your bike’s fork is made for one of the following sizes, you can use the rack: 9x100mm Quick Release; 12x100mm Thru-Axle; 15x100mm Thru-Axle, 15x110mm Thru-Axle, 20x100mm Thru-Axle, or 20x110mm Thru-Axle. These six sizes handle 99% of what’s out there, including road, cross, and gravel bikes, cruisers, and mountain and BMX bikes. Fat bike riders can use SeaSucker racks too, but you’ll need the proper Fork Up fork mount adapter to fit your bike.
Can I use a tandem?
Yes, but there are some spacing concerns to be aware of. Tandem bikes are longer than regular bikes, so you need to have enough room on the roof of your car to accommodate the rack and the bike. Measure from the center of your front wheel to the place where your rear wheel touches the ground, then add 12”. If your roof isn’t at least this long, it won’t fit. If you drive a tiny car like the Smart Car or Fiat 500, don’t even bother measuring because it’s too short. The second and equally important spacing concern is making sure your chain ring doesn’t come into contact with your roof. Cars with tops that slope a lot from front to back are not ideal. The flatter your roof is, the better.
Will it work in the rain/snow/freezing temperatures?
Absolutely. Sometimes we say “wetter is better” around here, but don’t take that in a weird way. SeaSuckers will typically hold better when wet, so the rain is no problem. With regard to snow and cold, be aware that if you remove your rack after using it in the cold, you may have to warm it up again to near room temperature before the rubber is pliable enough to make a solid seal to the mounting surface. Once it’s mounted (or if you didn’t remove it), you’re good to go. Also, for warmer weather we recommend that you wet the sealing edge of your rack before attaching. DO NOT DO THIS IN FREEZING OR NEAR-FREEZING TEMPERATURES. The vacuum cup will freeze to the surface of your car, which will prevent the vacuum pump and check valve from functioning properly. You’re still going to have to wipe your car clean in the cold, since the vacuum mounts won’t mount if there’s snow or ice on the car. Make sure to dry it before attaching your rack!
Will this hurt or damage my paint?
No, the vacuum pads, which are the only parts of the SeaSucker vacuum mounts that should touch your car, are made of the non-marking rubber compound.
Can I use this with a vinyl wrap? What about ceramic coating?
We don’t recommend using our products on wrapped vehicles. Our testing shows that our vacuum cups will pull a bubble in the wrap when attached, which screws up the wrap and is not a safe attachment point for a SeaSucker. To make it work, some people have removed the wrap just where the vacuum mounts will sit on their vehicle. However, you are absolutely able to use a SeaSucker rack on a ceramic coated car.
Will this dent my roof if I go over a bump?
We recommend that you mount your rack where your roof has supportive structure underneath, like just behind the front windshield or just in front of the rear window. Unsupported areas, like in the very middle of a roof, can flex when driving over bumpy roads.
Does it matter which way the rack is facing? Is it safe to use backwards (with the bike facing the trunk)?
A Talon rack can be mounted in either direction, but the bike must be facing forward. Always forward. We hate seeing pictures of people mounting their bike backwards or sideways. This voids your warranty and isn’t a safe way to carry your bike. Please don’t do this.
How long does it take to install? How do I attach the product to my car?
SeaSucker racks are generally recognized as the easiest and fastest to install. We’re contemplating calling Guinness for official certification. As for an actual time, that depends on your motivation and pumping speed. We’ve seen a Talon rack installed in as few as 8 seconds!
Is there a locking solution?
Yes there is; check out our optional Cable Anchors.
How do I know if my vacuum mounts are losing vacuum?
Every SeaSucker vacuum mount has an indicator band right on the plunger. When the vacuum mount starts losing vacuum, the plunger will begin to extend. When it extends far enough that you can see the orange band, it’s time to re-pump. Unlike traditional suction cups, with SeaSucker, you don’t have to take it off and lick it (unless you’re into that sort of thing, and we don’t judge) to revive it.
Can I rebuild the rack if a pad or pump goes bad in the future? Or do I need to purchase a whole new rack?
In addition to selling complete vacuum mounts that you could swap in for one that’s been damaged, we also sell replacement parts such as new vacuum pads and pumps.
How strong are the vacuum mounts?
“Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.
What if something like a bug or debris hits the vacuum mounts while I’m driving?
The bug will be obliterated; please take a second to honor its sacrifice. If the debris isn’t big enough to put a dent in your car, you have nothing to worry about. If it is, then you have bigger problems.
How long do the vacuum mounts last before they lose power?
There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker. For car racks, the simplest thing to do is to check the rack before you get in your vehicle, and check it each time you stop for gas, food, or the bathroom.
Does it matter which way the rack is facing? Can I flip it upside down to ensure my bike fits exactly where I want it?
Your bike should always be facing forward on the car, but the rack itself can be mounted “backwards”. You might want to do this for a better fit on either the roof, trunk, or hatch. Flipping the rack can often troubleshoot fit issues, such as a chain ring coming into contact with a rear hatch.
Can I use the rack on a textured surface?
Vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Very shallow texture may be okay, but should be tested (to test, attach the rack to the car and make sure the orange indicator bands are not showing after two hours of just sitting in your driveway). If the sealing edge of the vacuum pad doesn’t make a complete connection with the mounting surface, air will leak in through any gaps and will release the vacuum.
How should I store my rack when it’s not being used?
Every SeaSucker vacuum mount comes with a protective cover. Put the cover back on the vacuum pad when you’re not using it. Make sure to press the edge of the vacuum pad all the way into the cover; if it’s not fully seated in the cover, the edge of the cup could deform and make it difficult to attach your SeaSucker the next time you use it. If that does happen, let your SeaSucker sit on a flat surface like a countertop for a few hours until the deformation works itself out. Even though we put a UV inhibitor in the rubber and plastic we use, it’s a good idea to store your SeaSucker inside or in the shade because eventually the sun kills everything.
Which rack is best for E-bike?
Our Mini Bomber type of rack with the fork mount mounted in the center holes.
How long is the warranty and what does it cover?
Our basic warranty used to be just one year, but these things are so reliable we’ve extended it to a limited lifetime warranty. It covers the original purchaser against defects in materials and workmanship but not normal wear and tear. This is our warranty: SeaSucker offers a lifetime, non-transferable warranty to the original purchaser covering defects in materials and workmanship. Defective products can be returned to SeaSucker for replacement or repair (at SeaSucker’s option). Warranty claims must be accompanied by a sales receipt or other proof of purchase document. The cost of transportation to and from SeaSucker for the repair or replacement of any defective part or accessory is not covered by this warranty and is to be paid by the owner.
This warranty does not apply to damage or failure resulting from routine wear and tear expected in the normal use of this product, or to lack of maintenance, user error, alteration or modification of the product, accidents, misuse, abuse, or neglect.
This warranty is given in lieu of all other written or oral warranties, express or implied, including without limitation implied warranties of merchantability and fitness for a particular purpose, and are limited to the duration and specifications of this warranty.
Purchaser’s exclusive remedy under this warranty is the repair or replacement of a defective product or, at SeaSucker’s option, the issuance of a refund or credit for the purchase price of the product. SeaSucker’s liability for any damages relating to any allegedly defective product, whether arising from the use or the inability to use the product and whether claimed under tort, contract or any other legal theory, shall be limited to the actual price paid for such product and shall in no event include loss of use, loss of time, incidental, consequential, special, or indirect damages of any kind, even if SeaSucker is aware of the possibility of such damages, to the full extent as such may be disclaimed by law.
It is the user’s responsibility to ensure that the use of this product is not prohibited by any applicable local or state law.
Do I need to clean the surface I’m going to attach my SeaSucker to?
Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt.
What is the orange indicator band for?
The orange indicator band is a visual representation of how much vacuum power your cup has. Once you start to see the orange indicator band, that means it’s time to pump your product back up!
Where are SeaSucker products made?
SeaSucker products are proudly made in the USA. We go from raw materials to finished products all from our factory in Bradenton, Florida.